Clippie creator guide
How many words is a 30, 60 or 180-second script?
Word counts for 15-second to 10-minute video scripts at three speaking speeds, how Clippie times its AI voices, and why the finished recording decides.
By the Clippie team · Updated
The practical answer
Multiply the minutes by the speaking speed. At 150 words a minute, 30 seconds is 75 words, 60 seconds is 150 and 180 seconds is 450. Clippie’s editor assumes about 147 words a minute for an English AI voice, which gives 74, 147 and 441. Pauses lower every figure.
The formula, and what it assumes
Words equal seconds, times words a minute, divided by 60. The only real decision is the speaking speed, and that is an assumption until someone reads the script aloud. A calm explainer sits lower. An excited story sits higher. Nothing fixes one speed as correct.
Use the formula to plan, then replace the estimate with the length of the finished recording. A script with long names, many numbers or deliberate silences will run longer than its word count suggests.
Word counts from 15 seconds to 10 minutes
Each line gives the words that fill the length at 130, 150 and 170 words a minute, with no pauses. These are the result of the formula, rounded to a whole word. They are not measurements of any speaker.
- 15 seconds: 33 words at 130 a minute, 38 at 150, 43 at 170.
- 30 seconds: 65 words at 130 a minute, 75 at 150, 85 at 170.
- 45 seconds: 98 words at 130 a minute, 113 at 150, 128 at 170.
- 1 minute: 130 words at 130 a minute, 150 at 150, 170 at 170.
- 90 seconds: 195 words at 130 a minute, 225 at 150, 255 at 170.
- 2 minutes: 260 words at 130 a minute, 300 at 150, 340 at 170.
- 3 minutes: 390 words at 130 a minute, 450 at 150, 510 at 170.
- 5 minutes: 650 words at 130 a minute, 750 at 150, 850 at 170.
- 10 minutes: 1,300 words at 130 a minute, 1,500 at 150, 1,700 at 170.
What changes with an AI voice
An AI voice has a speed too, and it differs between voices. Clippie’s editor starts from 14.7 characters of English script per second of finished video, a default set from timing its own voiceovers. At six characters a word, spaces included, that is about 147 words a minute. Once you choose a voice, the estimate uses that voice’s own measured speed where there is one.
Delivery moves it again. In Clippie’s timing the Energetic delivery reads about 8% faster than Natural, so a script sized for 60 seconds finishes a few seconds early. The AI script writer accounts for this: it writes to the length you ask for with the voice and delivery you chose. Its targets at the default English speed are below.
- 30 seconds: about 74 words.
- 45 seconds: about 110 words.
- 1 minute: about 147 words.
- 90 seconds: about 221 words.
- 2 minutes: about 294 words.
- 3 minutes: about 441 words.
- 5 minutes: about 735 words.
- 10 minutes: about 1,470 words.
Other languages need a different budget
Word counts do not carry across languages, because words differ in length and voices in pace. Clippie’s editor uses a separate default for each language it has timed. Converted to words a minute, its defaults are about 133 for Spanish, 160 for German and 170 for French, against 147 for English.
Japanese and Chinese are written without spaces between words, so Clippie sizes those scripts in characters and shows no word count. These are the editor’s planning defaults, not research into how people speak. As with English, the finished voiceover is the figure that counts.
Take pauses and silent moments out of the budget
The formula counts speech only. A title card, a silent reveal or a beat of music is time with no words in it, so subtract it before you count.
Check the draft against the real voice
Count only the words that are spoken. Leave out scene labels, speaker names and directions in square brackets. Clippie’s own estimate leaves those out as well. Then paste the script into the script duration calculator, or into the editor with a voice selected, and compare the estimate with your target.
- The target length is fixed before the draft starts.
- The speaking speed is stated, not assumed silently.
- Silent moments are subtracted from the length.
- Only spoken words are counted.
- The finished recording replaces the estimate.
Common questions
How many words is a 30-second script?
Between 65 and 85 words depending on speaking speed: 75 at 150 words a minute, and about 74 at the speed Clippie’s editor assumes for an English AI voice.
How many words is a 60-second script?
Between 130 and 170 words: 150 at 150 words a minute, and about 147 at Clippie’s default English voice speed. Subtract words for any pauses.
How many words is a 3-minute, or 180-second, script?
Between 390 and 510 words: 450 at 150 words a minute, and about 441 at Clippie’s default English voice speed.
How many words is a 10-minute script?
Between 1,300 and 1,700 words: 1,500 at 150 words a minute, and about 1,470 at Clippie’s default English voice speed.
How many scenes does that word count make?
In Clippie, a scene is about 13 to 20 words at Normal pacing and 8 to 15 at Fast. A 147-word, 60-second script makes about 8 to 12 scenes at Normal pacing. The stickman length guide lists the scene count for every length.
Put the guide into practice.
Explore the matching workflow in Clippie, then build your next video around one clear idea.
Time your script